Wednesday, November 26, 2008

Samples of digital printing onto diverse surfaces.

This is a sample library of some of the surfaces I have attempted to print onto...
Things we can easily print onto now:
cheap paper (can give good results when treated with a digital ground)
watercolour paper - various weights
waxed paper
cheap aluminium foil
brown paper
paper bags
plastic table cloth covering
plastic table cloth covering with applied muslin
skin of acrylic paint
skin of acrylic gel
aluminium sheet
brown paper
acetate with gel medium applied
standard fabrics - silk, organza, hessian, canvas
ironed bubble wrap
plastic bags (various qualities)
screen printer's plastic
dyed fabrics (eg., rust stained silk)
1 Rough watercolour paper - Digital ground (DG) gloss clear
2 Calico, raw, not washed - DG gloss clear
3 Tyvek before heat treatment - DG non porous
4 Hessian (quite dark colour hessian) - DG gloss clear (right) DG white mat (left)
5 Cotton mix (rust dyed before printing) - DG clear gloss (left) DG not coated (right)
6 Organza - Where there is detail DG non-porous was used (centre elsewhere ink has spread and blurred)
7 High quality plastic bag - DG non porous (there is also a red rectangle where bag was printed red, and the roller marks can be clearly seen = NOT GOOD, these were later eliminated using plastic wedges under the wheel to lift them off the 'paper' as it fed through)
8 Normal Aluminium kitchen foil, crinkled and rolled prior to printing - DG non-porous
9 Waxed paper, prepared using shibori roll - DG non-porous
10 Rough water colour paper with gloss gel medium prior to printing - DG non-porous
11 Screen printer plastic - DG non-porous (roller marks lift slow drying ink = NOT GOOD! (rollers lifted in later samples as described above, see below)
12 Heavy table cover plastic - DG non-porous
13 Heavy table cover plastic with muslin applied using gloss gel medium before printing - DG non-porous
14 Acrylic paint (white) skin - DG non-porous
15 Bubble wrap thread sandwich - DG non-porous, some areas cleared of non-dried ink after printing
16 Screen printers plastic with muslin applied with gloss gel medium before printing - DG non-porous
17 Acetate sheet - DG non-porous (this surface can be used as a fine skin to apply to other surfaces (see later)
18 Frosted plastic (bag) - DG non-porous (right) no coating on left (ink extremely slow to dry but did dry eventually)

I will add more examples soon...


arlee said...

Quite a comprehensive sampling! Nice to see the photos and your explanations. They all look great---i even like the roller print marks---stellar trails:}

Unknown said...

Wow! Hello, these are gorgeous printing samples! Do you think that printing on those different surfaces is possible with any printer (ink jet? Laser?) I ask cause I'm always afraid of upsetting our old printer at home,(plus my husband:) if I try printing on anything else but paper:)
Have a creative day

Cathie said...

These are amazing samples. Thank you for sharing them. I must try your method of using the golden's gel as I am always running things through the printer (much to MY husband's dismay!!)
Really great.

Unknown said...

Hi interested in experimenting with some of my digital work by printing it on to alternative surfaces to see what the affect would be. Are you using printing methods or just a printer...soz if uv sed this already on ur blog...hugs and luv and seasons greetings